Manual Numerical Value Command - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
8 Other Setups

8.4 Manual Numerical Value Command

Monitr
MST
Setup
MST
The spindle function (S), miscellaneous function (M), tool function (T) and 2nd miscellaneous function (B) commands can
be executed.
The manual numerical value command can be executed by inputting an address such as S, M, T or B, as well.
It also can be commanded on the setup (Setup) screen.
Display items
Display items
S (spindle function) com-
mand value
M (miscellaneous function)
command value
T (Tool function) command
value
B (second (2nd) miscella-
neous function) command
value
IB-1501453-C
The command value of S (spindle rotation command value) is displayed.
The number of displays varies depending on the value of the parameter "#1039 spinno"
(Number of spindles).
However, if the value of the parameter "#1300 ext36(bit0) multiple-spindle control" is set
to "1" (Multiple-spindle control II), the number of displays is set to "1" regardless of the val-
ue of the parameter "#1039 spinno" (Number of spindles).
The command value of M (miscellaneous function command value) is displayed.
The number of displays is set to "1" regardless of the value of the parameter "#12005 Mfig"
(M count).
The command value of T (Tool function command value) is displayed.
The number of displays is set to "1" regardless of the value of the parameter "#12009 Tfig"
(T count).
Only the tool number is displayed regardless of the value of the parameter "#11038 T disp
type".
The command value of B (second (2nd) miscellaneous function command value) is dis-
played.
The number of displays is set to "1" regardless of the value of the parameter "#12011 Bfig"
(B count).
However, the value is displayed or hidden depending on the value of the parameter
("#1170 M2name" (2nd miscellaneous code)).
266
Details