Mitsubishi Electric C80 Series Instruction Manual page 35

C80 Series Instruction Manual
2 Screen Operations
VGA
(1)
The function window appears at the top of the screen by pressing
This window shows messages and machine status. You can also switch the CNCs through the window.
For some errors, such as "Communication error", the window appears automatically upon the occurrence.
If you perform the following operations while the function window is displayed, they will be done after the window is closed.
- You touch outside of the function window.
- The operation by the keyboard or mouse is attempted to be made.
Press this button to display the function window.
Note
(1) When inputting keys on the GOT with VGA resolutions, use the software keyboard. For details, refer to "2.6.2 Software
Keyboard".
IB-1501453-C
(7)
(4)
10
.
(3) (5)