Mstb History Screen - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
9 Machining a Workpiece

9.3.4 MSTB History Screen

(1)
Display items
Display items
(1) MSTB history
Menus
Menus
When this is highlighted, it indicates that the MSTB history pop-up window is open. If the menu is
MSTB
pressed when this menu is highlighted, the system will close the MSTB history pop-up window, and the
history
main pop-up window opens.
The MSTB codes used for the machining are listed after the restart search is complet-
ed.
The displayed value can be set (manual numerical value command) as the current
modal value until the reset or starting is applied. The character color is changed for the
value which is once set.
The number of displayed codes is as follows: M: up to 35, S1 to S8: 3 each, T: 3, B:3.
If the number of codes used for the machining exceeds the displayable number of
codes, the codes which have been used in the beginning is not displayed.
Address T will display only the tool number regardless of the parameter (#11038 T
disp type).
321
Details
Details
IB-1501453-C