Buffer Correction - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
9 Machining a Workpiece

9.5.2 Buffer Correction

Monitr
P corr
The next command can be corrected and changed by block stop during the automatic operation in the memory mode or
the operation in the MDI mode.
When a program error occurs, the block in which the error occurred can be corrected without resetting the NC, and opera-
tion can be continued.
Memory
MDI
(1) The next command can be corrected in the following two cases.
When single block stop is applied, and there is a command block to be corrected in the next command.
When there is an error (program error) in the next command and automatic operation is stopped.
(2) Not only the displayed buffer data but also the contents in the device are corrected with the buffer corrections. (The
corrected data is reflected.)
(3) Several blocks following the next command can be corrected simultaneously.
Menus
Menus
This closes the pop-up window and quits this function.
Close
Preread Execution
block block
NC operation
Buffer correction
Details
341
Machine
control
IB-1501453-C