Executing An Operation Search - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
9 Machining a Workpiece

9.1.1 Executing an Operation Search

Operation method
(1)
Press the to select the part system to run.
(2) Press the main menu [Search].
(3) Select the device.
(4)
Press the [↑], [↓],
to the directory containing the file to be set.
(5) Press the [INPUT] key.
If the list contents differ from the actual device or di-
rectory, press the menu [List Update].
(6)
Press [↑], [↓],
the machining program to be edited.
(7) Press the [INPUT] key.
When designating the sequence number and block number and searching for the program, input the search conditions in
the input area.
The program No. is categorized according to the presence of an extension.
Input details
1001/1/2 O1001
1001.PRG/1/2 O1001.PRG
/1/2 (Currently searched O No.)
1001/2 O1001
1001/1 O1001
1001 O1001
/1 (Currently searched O No.)
//2 (Currently searched O No.)
Note
(1) The maximum number of digits is eight for the sequence No. and five for the block No.
(2) Program after operation search
(a) Operation search is canceled if the following operations are carried out on the edit screen after operation search.
Execute restart search in this case.
If the searched program is erased.
If the searched sequence No. is erased.
If the block corresponding to the searched block No. is erased.
(b) Operation search cannot be executed in another mode during MDI operation even if the block is stopped. Wait for
MDI operation to end or reset the NC before searching.
IB-1501453-C
or key to move the cursor
or key to move the cursor to
(Program No.)
The selected part system appears on the upper left of the
screen.
The sub-menu is displayed.
The list appears as a pop-up window.
The selected device name and root directory (memory:/)
are displayed in the device name and directory display
fields.
Moves into the directory.
The search starts.
When the search is completed, the searched device and
program position appear in the display area for the ma-
chining program currently being executed.
Sequence number
N1
N1
N1
N0
N1
N0
N1
N0
278
Block No.
B2
B2
B2
B2
B0
B0
B0
B2