Manually Setting The Workpiece Coordinate System Shift Value - Mitsubishi Electric C80 Series Instruction Manual
Hide thumbs
Also See for C80 Series:
- Manual (749 pages) ,
- Maintenance manual (162 pages) ,
- Connection and set up manual (304 pages)
Table of Contents
Advertisement
C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
5.9.1 Manually Setting the Workpiece Coordinate System Shift Value
Operation method (Set the absolute value "10.000" to the workpiece coordinate system shift value of the Z axis (2nd
axis) on the Monitor screen.)
(1)
This displays the workpiece coordinate system shift.
<Monitor screen>
Press the menu [W-shift].
<Setup screen>
Press the menu [W-meas].
(2)
Use the [↑] or [↓] key to move the cursor onto the Z
axis.
(3)
Designate the workpiece coordinate system shift val-
ue.
10 [INPUT]
The value can also be designated by pressing the
menu [=INPUT] instead of the [INPUT] key.
Note
(1) If the parameter "#11017 T-ofs set at run" (Tool compensation amount setting during automatic operation enabled) is
set to "1", the workpiece coordinate system shift value can also be designated in the automatic operation mode or op-
eration pause mode.
Operation method (Add the value "1.234" to the workpiece coordinate system shift value of the C axis (3rd axis) on
the Monitor screen.)
(1)
This displays the workpiece coordinate system shift.
<Monitor screen>
Press the menu [W-shift].
<Setup screen>
Press the menu [W-meas].
(2)
Use the [↑] or [↓] key to move the cursor onto the C
axis.
(3)
Input a numeric value.
1.234 [+INPUT]
Note
(1) If the parameter "#11017 T-ofs set at run" (Tool compensation amount setting during automatic operation enabled) is
set to "1", the workpiece coordinate system shift value can also be designated in the automatic operation mode or op-
eration pause mode.
IB-1501453-C
The workpiece coordinate system shift screen is dis-
played.
The cursor moves to the Z axis.
The designated value appears.
The cursor moves to the next axis.
The workpiece coordinate system shift screen is dis-
played.
The input value added to the original value is displayed.
(Example) When the original value is set to "10.000",
"10.000 + 1.234 = 11.234" is displayed.
230
Advertisement
Table of Contents
