Executing Restart Search (Restart Type 2) - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
9 Machining a Workpiece

9.3.7 Executing Restart Search (Restart Type 2)

If a machining program differing from the machining program to be restarted was run before starting restart search, restart
the respective machining program with restart type 2.
The restart type 2 operation sequence is the same as restart type 1, but necessary matters for starting the machining pro-
gram, such as setting the coordinate system, must be completed before starting restart search.
When the parameter "#8914 Auto Top search" is "0", execute the top search for the machining program.
Operation method (When the parameter "#8914 Auto Top search" is "0")
(Example) When restarting from subprogram O123 N6 B2 called from main program O1000
(1) Turn the power ON, and return all axes to the refer-
ence position.
(2) In the MDI mode, set the coordinate system to be
used when starting the program to be restarted.
(3) Move each axis to the program restart position.
(4) Press the main menu [Reserch].
(5) Press the [Type 2].
(6) Press the sub-menu [Top search].
(7) Press the sub-menu [Device select].
Select a device and press the menu key.
(8)
Press the [↑], [↓],
to the directory to which the file to be set belongs.
Press the [INPUT] key.
(9)
Press [↑], [↓],
the machining program to be edited.
(10) Press the [INPUT] key.
The search can be executed by pressing the menu
[Search exec] instead of the [INPUT] key.
or key to move the cursor
or key to move the cursor to
The sub-menu is displayed.
The main screen for restart search appears as a pop-up
window.
The window for top search appears as a pop-up window.
Set the cursor to 1000.
The top search starts.
When the top search is completed, the operation mes-
sage "Top search completed" appears.
The top search pop-up window closes, and the main
screen for restart search appears as a pop-up window.
325 IB-1501453-C