Mitsubishi Electric C80 Series Instruction Manual page 41

C80 Series Instruction Manual
2 Screen Operations
Display items
Display items
(1) Unit name/icon display The currently displayed unit name (name set in the parameter "#1135 unt_nm") is dis-
(2) Part system name
(3) NC Status
(4) Operation mode/MDI
status
(5) Screen group
(6) Operation status
(7) Alarm message
(8) Operation message
(9) S/W Key button
(10) Time
(11) Host connected status
(12) Menu return button
(13) Menu change button
(14) Menus
(15) Window name
(16) Close button
IB-1501453-C
played. When the unit name is not set, it is not displayed.
When you use the multi-part system, the name of currently displayed part system
(name set in the parameter "#1169 part system name", or name set in the parameter
"#12059 SBS_name" for operating as the sub part system) is displayed.
The part system name is not displayed for the 1-part system.
When the values are not set in the parameter, "'$' + (part system number)" is displayed.
(Example) $2 for the 2nd part system.
When the values are not set in the parameter for the name of sub part system, "'SUB
+ (part system number)" is displayed.
(Example) SUB2 for the 2nd part system.
The current NC status is displayed. When the status is multiple, the high-priority con-
tents are displayed.
The displayed part system's operation status is displayed. The MDI status is also dis-
played when the MDI operation mode is selected.
The currently selected screen group is displayed.
The NC operation status is displayed.
The highest-priority message among the currently occurring alarms or warnings is dis-
played.
The operation message is displayed.
When the button is touched, the software keyboard is displayed.
The current time is displayed. (hour:minute)
This appears in the form of an icon when the parameter "#8931 Display/Set limit" is "0"
or "1", and the other host PC or display unit is connected.
The displayed screen operation menu is switched to the screen selection menu of the
current screen group. This is also used to cancel the menu operations of the displayed
screen.
When all menus cannot be displayed at a time, the menus other than currently dis-
played menus are displayed.
This is used to switch the screen, select the screen specific operation, etc.
Then name of currently displayed window is displayed.
When the button is touched, the window is closed.
16
Details