Mitsubishi Electric C80 Series Instruction Manual page 419

C80 Series Instruction Manual
11 Performing a Backup Operation
Menus
Menus
This changes the setting area to file setting column A (transfer origin) or file setting column B (transfer
Area
destination).
change
The display of the valid area (A or B) is highlighted.
This displays the sub-menu of the machining program storage area.
Device
When the sub-menu is selected, the device is confirmed, and if a directory exists it is set in the root.
select
The memory is selected as the default.
This menu sets the directory that carries out input/ output operations, and is on standby for input. Note
Dir
that when memory is selected for the device, the directory can be selected from the sub-menu.
This menu sets the file name that carries out input/ output operations, and is on standby for input.
File
When memory is selected for the device, setting is not necessary if the directory is not the program.
name
This updates the list. The list of the directly selected in the currently valid file setting column (A/B) is up-
List
dated.
update
This copies the file in file setting column A (transfer origin) to the file setting column B (transfer destina-
Transfr
tion). (The transfer origin file is not changed.) A message appears during transfer and when the transfer
A  B
is completed.
This compares the files in file setting column A (transfer origin) and file setting column B (transfer desti-
Compare
nation).
A:B
This erases the file in file setting column A.
Erase A
<Note>
NC memory files other than the program cannot be erased.
This erases the file in file setting column B.
Erase B
<Note>
NC memory files other than the program cannot be erased.
This changes the name of the file in file setting column A (transfer origin) to the name of the file in file
Rename
A  B
setting column B (transfer destination).
<Note>
The same device must be selected for A and B.
NC memory files other than the program cannot be renamed.
This changes whether to show or hide the comment field.
Comment
nondisp
This creates a new directory in the directory of the currently valid file setting column (A/B).
Dir
create
The directory can be created when the memory card or the USB memory is selected for the device.
This adds the contents of the file in file setting column B to that of in file setting column A. (The file in file
Merge
B  A
setting column B is not changed.)
<Note>
NC memory files other than the program cannot be merged.
This interrupts the process (transfer, compare, etc.) during its execution.
Stop
IB-1501453-C
Details
394