C80 Series Instruction Manual
7 Setting Machine Movable Area
The barrier data which is set on this screen will be set to NC by converting to the parameter "#8301 P1" to "#8306 P6".
Specify the workpiece center coordinates (P0) of X axis for the chuck and tailstock in advance with the parameter "#8300
P0" on the menu [Barrier data] of parameter screen. The workpiece center coordinates (P0) of Z axis are the machine co-
ordinates zero point.
(1)
(3)
Display items
Display items
(1)
Guide graphic
IB-1501453-C
This displays the guide drawing of barrier type. The guide drawing is switched according
to the selected barrier form.
The drawing is the left-side barrier guide drawing.
Chuck type 1 guide drawing
252
Details
Chuck type 2 guide drawing
(2)
(4)