Mitsubishi Electric C80 Series Instruction Manual page 411

C80 Series Instruction Manual
10 Troubleshooting
Displaying the PLC device input/output signal
To refer the arbitrary input/output signal status, enter the target device No. to the input area, and the display will be
switched.
(Example) For displaying the input/output signal of the arbitrary device No. "X0020"
(1) Press the tab key
(2) Set the device No. (X0020), and then press the [INPUT] key.
Note
(1) Setting a device No. which exceeds the specification or setting an illegal address causes a setting error.
Changing the display with the page keys
The operation target device Nos. change in page unit when
range of device numbers of which the device has.
IB-1501453-C
or to select the area where the data is displayed.
/ is pressed. Changing of the pages stops within the
386