Mitsubishi Electric C80 Series Instruction Manual page 372

C80 Series Instruction Manual
10 Troubleshooting
Display items
Display items
(1) NC message
(2) Stop code
(3) Alarm message
(4) Operator message
Message display colors
The messages are color-coded in the following manner:
NC message
Stop code
Operator message
Axis name display
The axis name is displayed in messages for each axis. The axis name is displayed as shown below according to the axis
type.
Axis type
NC axis Control axis name (Name of axis in
part system)
Spindle 'S' + spindle No.
PLC axis 'P' + PLC axis No.
If the same message occurs for different axis types, they will appear as separate messages.
Part system display
The part system name is also displayed if the message is output for each part system. The part system name set in "#1169
system name" is displayed. The part system name does not appear for the 1-part system.
This displays the operation alarms, program errors, MCP alarms, servo alarms, sys-
tem alarms, etc.
Up to 10 messages are displayed in order of priority.
This displays the automatic operation status or stop status during automatic operation.
Up to 4 messages are displayed in order of priority.
The alarm messages for PLC are not displayed.
The macro alarm messages are displayed.
Up to 4 messages are displayed.
Message type
Alarm
Warning
Axis name display
XYZ
S1S2
P1P2
Details
Character color
White
Black
Black
Black
Display
example
If the same message occurs for each part system,
several NC axes are displayed together.
If the same message occurs, several spindles are
displayed together.
If the same message occurs, several PLC axes are
displayed together.
347
Background color
Red
Yellow
Yellow
Yellow
Remarks
IB-1501453-C