Mitsubishi Electric C80 Series Instruction Manual page 425

C80 Series Instruction Manual
11 Performing a Backup Operation
Selecting a device file other than the NC memory (When separately selecting the directory and file name.)
(1) Press the menu [Device select].
(2) Select the device.
(3) Select the menu [Dir].
(4) Select a file.
<When inputting the directory from the input area>
Input the directory path as a full path.
/PRG/PRECUT [INPUT]
<When selecting the directory from the list>
Press the menu [From list].
Move the cursor to the directory to be selected and
(5)
set.
[↑], [↓] [INPUT]
Repeat this operation until the cursor arrives at the
target directory.
When the target directory is reached, press the
key and quit the mode for inputting the directory.
Note
(1) Refer to next section "Selecting a device file other than the NC memory (When simultaneously selecting the directory
and file name.)" procedure (3) or later for method of file designation.
IB-1501453-C
The cursor appears in the list.
The selected directory appears in the data setting col-
umn.
The contents of the selected directory appear in the list.
/PRG/PRECUT
400