Nc Status - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
2 Screen Operations
Note
(1) When "1" is set, the color is changed depending on the setting of the parameter "#11060 Screen theme color".
Displaying the sub part system name
When the part system operates, which is set to sub part system with the parameter "#12049 SBS_no", the sub part system
name can be displayed as the part system name. The name can be set with parameter "#12059 SBS_name".
Display area for the part system names shown in the following figures can switch main/sub part system display according
to NC operation status.
[1-part system display]

2.2.2 NC Status

The display area for NC status indicates current NC operation status. (nothing is displayed in normal condition.)
When the NC operates with three or more status, the higher-priority two status are displayed. (The items in the following
table are listed in order of priority.)
While any status is being displayed, this indicator flashes at intervals of approximately 1 second.
Display position Display items
Left side PR
Right side AT
HC
RN
BT
IB-1501453-C
[2-part system display]
The parameter has changed, and it requires turning the power ON again. The
parameter will be validated after turning the power ON.
Indicates when auto tuning is valid. In this case, the automatic start is disabled.
Indicates when the high cycle sampling is valid.
Indicates when selecting machining surface.
Indicates when backlash auto adjustment is ON.
18
Meaning