Comparing Files (Compare) - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
4 Inputting and Outputting a Machining Program

4.4 Comparing Files (Compare)

Edit
I/O
This section explains method used compare files after transferring on the I/O screen of the edit (Edit) screen.
Refer to "4.2 Selecting a Device, Directory and File" for details of the device, directory, and file specification method.
Operation method
(1) Use the [←] or [|←] key to select file setting column
A on the I/O screen of the edit screen.
(2) Designate the device, directory and file name to be
compared.
(3) Use the [→] or [→|] key to select file setting column
B.
(4) Designate the other device, directory and file name
to be compared.
(5) Press the menu [Compare A:B].
Note
(1) Files that can be compared are text files only. Correct outcome will not be obtained through binary file comparison.
(2) In a file comparison, even if "#8936 Delete leading 0" is set to "1", when comparing one separate file that contains one
program, "0" at the head of the program name is not deleted. Designating the file name is required.
(3) When a wildcard "*" is designated for the transfer source file, the comparison is executed excluding the programs which
are subject to the edit lock according to the status of Edit lock B and C.
IB-1501453-C
The file comparison starts.
The input data and comparison data appear in the input/
comparison data display area.
A message appears when the comparison is completed.
If a comparison error occurs, the block with the error is
displayed in the comparison data display column on the
screen.
108