Mitsubishi Electric C80 Series Instruction Manual page 97

C80 Series Instruction Manual
3 Inputting a Machining Program and Defining Variables
Operation method (Pasting the copied data)
(1) Move the cursor to the line where the data is to be
pasted.
(2) Press the menu [Paste].
(3) Press the [INPUT] key.
Note
(1) With multi-program display type, data can be copied and pasted between the each editing areas by pressing the [<-->
change] key.
(2) "Executing" is displayed in flickering during pasting.
IB-1501453-C
<When copying a line data>
The copied data is inserted upward on the line where the
cursor is positioned.
<When copying characters>
The copied data is inserted in front of the cursor position.
<Note>
In the overwrite mode, the data is inserted in front of
the cursor position as well.
72