Undoing Program Changes - Mitsubishi Electric C80 Series Instruction Manual
Hide thumbs
Also See for C80 Series:
- Manual (749 pages) ,
- Maintenance manual (162 pages) ,
- Connection and set up manual (304 pages)
Table of Contents
Advertisement
C80 Series Instruction Manual
3 Inputting a Machining Program and Defining Variables
3.6.10 Undoing Program Changes
This is used to return the program to the form when [INPUT] was last pressed to save. This operation is valid for the oper-
ation of "Rewriting program", "Insert", "Delete", "Line Paste", "Line Clear", "Character String Replace" and "Undo" functions.
Operation method
(1)
Change the operation to memory mode, and then
press the main menu [Edit].
(2)
Move the cursor to the position to be corrected, and
input a character.
(Example) 135
If [Undo] is pressed during "Editing", the system will
be returned to the state saved last.
(3)
Press the [INPUT] key.
(4)
Press the menu [Undo].
(5)
Press the menu [Undo] again.
Note
(1) This function is only valid when parameter "#8910 Edit undo" is set to "1".
(2) When returned to the previous status, the cursor will move to the head line.
(3) With the multi-program display type, returning to the previous contents is valid only in the active area.
(4) When undoing is performed, the copied data will be canceled.
(5) "Executing" is displayed in flickering during undoing.
(6) When the parameter"#8939 Undo confirm msg" is set to "1", if [Undo] is pressed, the menu is highlighted and the oper-
ation message "OK? (Y/N)" appears. The program returns to the previous status by pressing [Y] or [INPUT] key. If other
key is pressed, the operation is canceled. When the operation is canceled, the menu highlight returns to normal and the
message is deleted.
(7) When the program does not return to the previous status by pressing [Undo], [Undo] is not highlighted and the operation
message "Data protect" or "Executing automatic operation" appears.
The edited machining program is saved to the device.
The message "Editing" disappears.
The contents of the file return to the same condition as
when the editing was started.
These contents of the file are saved to the device.
The contents of the file return to the same condition as
when the file was saved in the procedure (3).
These contents of the file are saved to the device.
73
IB-1501453-C
Advertisement
Table of Contents
