Integrated Time; Integrated Time Display - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
8 Other Setups
8Other Setups

8.1 Integrated Time

8.1.1 Integrated Time Display

Monitr
Time
The integrated time (date, time, power ON time, automatic operation time, automatic start time, external integrated time 1,
external integrated time 2, cycle time) controlled by the NC can be set and displayed.
Note that the cycle time cannot be set.
The integrated times displayed in cycle time display area on the Monitor screen can be set.
Display items
Display items
#1 Date
2 Time
3 Power ON
4 Auto oper
5 Auto strt
6 Ext time 1
7 Ext time 2
8 Cycle time
Input section
Note
(1) When the #3 Power ON to #8 Cycle time displays reach the maximum value (9999:59:59), the count stops, and the
maximum value remains displayed.
IB-1501453-C
The current date set in the NC is displayed.
Year: 4 digits, Month: 2 digit, Date: 2 digit (YYYY.MM.DD)
The current time set in the NC is displayed using the 24-hour system.
(HH:MM:SS)
This displays the total integrated time of the time from NC power ON to OFF.
(HHHH:MM:SS)
This displays the total integrated time of the work time from automatic start button pressing
in the memory mode or MDI to M02/M30 or reset button pressing.
(HHHH:MM:SS)
This displays the total integrated time during automatic starting from automatic start button
pressing in the memory mode or MDI to feed hold stop, block stop, or reset button pressing.
(HHHH:MM:SS)
This content differs depending on MTB specification. (HHHH:MM:SS)
This content differs depending on MTB specification. (HHHH:MM:SS)
This displays the time that automatic operation is started from when the automatic start but-
ton is pressed in the memory mode or MDI to when feed hold stop or block stop is applied
or the reset button is pressed.
This displays details of the key input.
Details
258