Mitsubishi Electric C80 Series Instruction Manual page 29

C80 Series Instruction Manual
1 Outline of Menu Items
Menus
This manages the tool life data.
The life management data such as the tool usage is set and dis-
T-life played.
There are two types of the tool life management method.
This sets the workpiece coordinate system offset.
The offset value managed by NC can be set and displayed.
Coord
This executes workpiece measurement, it also sets and mea-
sures the workpiece coordinate system shift.
W-meas
<Note>
This menu appears under any of the following conditions:
- The parameter "#8932 Hide measure scrn" is set to "0".
- The parameter "#11056 Workshift invalid" is set to "0" for
L system.
This sets and displays the management data for each tool.
These data are relevant to which displayed on the [T-ofs] or [T-
T-Mng. life] screen, that can be set the tool information. Thus the mu-
tually-referenced data can be set and displayed on this screen.
This edits an MDI program.
The pop-up window appears to display the MDI program con-
MDI tents by pressing main menu [MDI].
This is to set the relative value counter.
This displays the pop-up window of the relative position counter
Cnt set to execute the counter setting.
This sets an arbitrary value for S, M, T and B.
Manual numerical value command is set and executed by in-
MST putting an address key, such as S, M, T and B.
This sets the user parameters.
The parameter can be set and displayed by switching types.
User
This stores the thread groove position to enable re-thread ma-
chining.
Storage
<Note>
This menu is not displayed when the additional specifica-
tion for thread recutting is not added.
This sets the high-accuracy parameter which meets the ma-
chining purpose or machining process.
MacCond
<Note>
This menu is not displayed when the additional specifica-
tions related to high-accuracy control are not added.
This sets and displays the chuck barrier and tailstock barrier.
<Note>
Barrier
For M system, this menu is not displayed.
IB-1501453-C
Details
4
Reference
5.6 Tool Life Management
5.8 Setting Workpiece Coordinate Sys-
tem Offset
5.9 Setting Workpiece Coordinate Sys-
tem Shift
5.5 Setting the Tool Management Data
(Tool Management Screen)
8.5 MDI Program Editing
8.2 Counter Setting
8.4 Manual Numerical Value Command
6.1 Setting User Parameters
8.6 Thread Recutting Function
6.2 Selecting High-accuracy Control
Parameters (Machining Cond I Screen)
7.2 Chuck Barrier/Tailstock Barrier (L
System)