Displaying Data By Designating Tool No - Mitsubishi Electric C80 Series Instruction Manual
Hide thumbs
Also See for C80 Series:
- Manual (749 pages) ,
- Maintenance manual (162 pages) ,
- Connection and set up manual (304 pages)
Table of Contents
Advertisement
C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
5.5.7 Displaying Data by Designating Tool No.
Operation method ("#8975 No. search process" is "0")
The designated tool number is searched from the tool management data under the cursor position, and the tool number is
displayed at the top when it is found. If the designated tool number is not found until the end of the tool management data,
the search is performed from the head.
(Example) Search data number 12.
(1)
Display the tool management screen.
(2)
Press the menu [Tool No. search].
(3)
Enter the tool management data number to display,
and press the [INPUT] key.
12 [INPUT]
Note
(1) If the tool number cannot be found, the message "Designated tool number not found" is displayed, and the input section
is not cleared.
Operation method ("#8975 No. search process" is "1")
(Example) Search tool number 12.
The designated tool number is searched from the tool management data under the cursor position, and the tool number is
displayed at the top when it is found. If the designated tool number is not found until the end of the tool management data,
the search is performed from the head.
When you press the menu [Tool No. search] again after the search is completed, the search restart for the previously
searched tool No.
The previously searched tool number is maintained until the tool management screen is closed, or the display is switched
to the detailed view.
(1)
Display the tool management screen.
(2)
Enter the tool number you wish to display.
12
(3)
Press the menu [Tool No. search].
The tool management data list is displayed.
After the search is completed, the operation message
"Search complete" appears.
The input column is cleared.
The designated tool number is searched from the tool
management data under the cursor position, and first-
found tool management data is displayed at the top.
The cursor is shifted to the head line of the display.
The highlight of the menu [Tool No. search] returns to
normal.
The tool management data list is displayed.
After the search is completed, the operation message
"Search complete" appears.
The input column is cleared.
The designated tool number is searched from the tool
management data under the cursor position, and first-
found tool management data is displayed at the top.
The cursor is shifted to the head line of the display.
175
IB-1501453-C
Advertisement
Table of Contents
