Creating A Directory - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
4 Inputting and Outputting a Machining Program

4.7 Creating a Directory

Edit
I/O
This section explains the method used to newly create a directory.
Refer to "4.2 Selecting a Device, Directory and File" for details of the device, directory, and file specification method.
Operation method
(1) Use the [←] or [|←] key to select file setting column
A.
(2) Designate the device.
(3) Select a directory to be newly created from the list, or
designate by inputting from the input area.
(4) Set the new directory in the file setting column A.
(5) Press the menu [Dir create].
The directory can also be created in file setting col-
umn B.
Note
(1) Make sure that the directory path is less than 100 characters. When the path exceeds 100 characters, it cannot be rec-
ognized as a path.
The directory contents appear.
The directory is created.
111 IB-1501453-C