Mitsubishi Electric C80 Series Instruction Manual page 418

C80 Series Instruction Manual
11 Performing a Backup Operation
Display items
(3) List
(4) File setting column A
(5) File setting column B
(6) Input data
(7) Comparison data
(*1) Some items may not be displayed depending on the device.
○ : Displayed × : Not displayed
Display item/Device
Number of programs
registered
Remain
Number of memory
characters
Remain
List
(*2) When the number of characters in the directory path (full path) from the root directory exceeds 100, the directory path
is not retained, but a previously set directory path containing 100 characters or less retained.
When the device is "Memory", the initial directory display is "Program".
This displays a contents list (directory and file name) of the directory in the setting col-
umn (file setting column A or B) where the cursor is currently located.
Program: When "Memory" is selected for the device, this displays the file name (pro-
gram No.) of the machining programs already registered.
The file names are displayed in order from the smallest number, from 1 to 99999999.
When a device other than memory is selected, this displays the file name and directory
to be included in the directory that is set in the current setting column.
When they exceed the displayable number of characters (12 characters), the excess is
abbreviated and displayed (*).
Character: The size of each file (when memory is selected for the device, the number of
characters in the machining program).
When directory is selected, this displays "DIR".
Comment: This displays the comment (up to 17 alphanumeric characters and symbols)
of each file.
The date which the file is updated is displayed for the memory card or USB memory.
When the number of characters exceeds 17, the excess is not displayed.
This sets the device, directory, and file name for which the transmission, compare, and
erase functions are used.
When transferring, the file name of the transfer origin file is set. When renaming, the file
name before renaming is set. When erasing, the erasing range is set.
When the number of characters exceeds 28, the excess is not displayed.
As for the device and directory, the setting values are retained even when the power is
turned OFF. (*2)
This displays the data being transferred.
This displays the data being compared. If an error occurs while comparing data, the
block for which the error occurred is displayed.
Memory Memory2
○
○
○
○
○
393
Details
Memory card
○ ○
○ ×
○ ○
○ ○
○ ○
USB memory
○
×
○
○
○
IB-1501453-C