C80 Series Instruction Manual
9 Machining a Workpiece
(3) A program with 33 or more file name characters cannot be searched.
(4) Searched program No. is memorized in NC even after the power is turned OFF. When NC starts up after the power is
turned ON again, the program which has the previously searched program No. will be operated.
9.1.2 Changing Whether to Show or Hide the Comment Field
The file name field can be extended by changing whether to show or hide the comment field.
Operation method
(1)
Press the menu [Comment nondisp].
(2)
Press the highlighted [Comment nondisp] again.
(Example) When the file name is "123456789A123456789B123456789C12"
"Comment display" is validated: The file name display is omitted and "*" is attached.
"Comment display" is invalidated: The file name is displayed up to 32 alphanumeric characters and symbols.
Note
(1) The set status is held even if the NC power is turned OFF.
(2) The set status is common for list view of operation screen, restart search screen, etc.
(3) The cursor moves to the head when display/non-display in the comment field is switched.
The file name is displayed up to 32 alphanumeric char-
acters and symbols after the comment field disappears.
The comment field appears, and the file name is dis-
played up to 13 alphanumeric characters and symbols.
279
IB-1501453-C