Chuck Barrier/Tailstock Barrier (L System) - Mitsubishi Electric C80 Series Instruction Manual

Hide thumbs Also See for C80 Series:

Table of Contents

C80 Series Instruction Manual

7 Setting Machine Movable Area

7.2 Chuck Barrier/Tailstock Barrier (L System)

Use this function to set and display the chuck barrier and tailstock barrier.

By limiting the tool nose movement range, the chuck barrier and tailstock barrier prevent the tool from colliding with the

chuck and tailstock due to programming errors.

Three points can be input for both the chuck barrier and tailstock barrier. Select either [Enter length] or [Enter coordin] to

input (set) the barrier data.

(1) Enter length: To set the barrier position of the chuck or tailstock with the length (length between P points).

(2) Enter coordin: To set the barrier positions of the chuck and tailstock with the distance from the workpiece center coor-

dinates (P0). Input the radius value to set the X axis.

(1) Enter length

(2) Enter coordin

IB-1501453-C