Mitsubishi Electric C80 Series Instruction Manual page 52

C80 Series Instruction Manual
2 Screen Operations
Note
(1) The contents of the parameter "#8004 SPEED" (the previous parameter on the parameter screen) are displayed by
pressing the key. However, when the
played contents do not change. The contents of the parameter "#8006 ZONE d" (next parameter on the parameter
screen) are displayed by pressing the
parameter type, the displayed contents do not change.
Pressing the [↑] or [↓] key scrolls the explanation contents of the parameter guidance in a page unit.
When the [↓] key is pressed while the last line is displayed, next guidance appears. When the [↑] key is pressed while
the top line is displayed, the previous guidance appears.
However, when the [↑] key is pressed while the first parameter guidance is displayed, or when the [↓] key is pressed
while the last parameter guidance is displayed, the display does not change.
(2) The contents of the first parameter for the fixed cycle parameter are displayed by pressing the
rameter guidance window is displayed, the displayed parameter contents are recorded for each parameter type. When
the parameter type is changed with
(3) When the parameter No. could not be acquired (when the cursor was non-display or was on a blank or comment line),
the top of parameter guidance for each parameter appears.
(4) The parameters whose contents/setting range are similar or same are collectively displayed.
(Example: PLC integrated timer)
Precautions
(1) If the [?] key is pressed when alarm occurs, the alarm guidance window will open.
(2) Once the guidance data is read, the guidance can be displayed even when the memory card is removed.
(3) Press the [?] key on a screen other than [Mainte] - [Param] and [Setup] - [User parameter] when an alarm is not being
occurred, and the head parameter guidance of parameters is displayed.
key is pressed on the first parameter of each parameter type, the dis-
key. However, when the
/ key, the contents of the previously displayed parameter are displayed.
27
key is pressed on the last parameter of each
key. While the pa-
IB-1501453-C