Mitsubishi Electric C80 Series Instruction Manual page 103

C80 Series Instruction Manual
3 Inputting a Machining Program and Defining Variables
Display items
Display items
(1) Machine position count-
er
(2) Playback counter
(3) Playback editing input
area
(*1) The displayed title and playback movement amount are as follows.
#1126 PB_G90
0 (Incremental value)
1 (Absolute value)
IB-1501453-C
This displays the machine position counter.
Up to max. number of axes in a part system can be displayed.
M system: Max. eight axes
L system: Max. five axes, the sixth axis or later is switched by the menu [Next axis].
When the rotary axis (except for all coordinate linear type), the display range is 0.000°
to 359.999°.
This displays the playback movement amount (axis movement value).
When "absolute/incremental command depending on G command", the title and play-
back movement amount differs according to the parameter "#1126 PB_G90". (*1)
When "Absolute/incremental command depending on address code", both titles are
displayed.
Up to max. number of axes in a part system can be displayed.
M system: Max. eight axes
L system: Max. five axes, the sixth axis or later is switched by the menu [Pback next
ax].
When the rotary axis (except for all coordinate linear type), the display range is as be-
low:
For INC (Rotary type short-cut disabled, workpiece coordinate linear type): -359.999°
to 359.999°
For INC (Rotary type short-cut enabled: -180.000° to 179.999°
For ABS: 0.000°to 359.999°
The contents of playback editing is input.
When the axis address keys such as X and Y are input, the playback counter value
currently displayed is input after the axis address.
Title
Playback: INC
Playback: ABS
78
Details
Playback movement amount
Playback movement amount before axis moves + axis
movement amount
The program position + manual interrupt amount