Mitsubishi Electric C80 Series Instruction Manual page 144

C80 Series Instruction Manual
4 Inputting and Outputting a Machining Program
(9) Press the menu [Compare A:B].
Note
(1) When programs are output in a batch from NC memory, always specify "Program batch" to NC memory directory as
transfer source. If "Program batch" is not specified, the program is transferred by one program per one file.
(2) When the programs which are subject to edit lock exists in NC memory, those file is not transferred. (The files are trans-
ferred excluding those files.) The verification is executed excluding the programs which are subject to edit lock. (Refer
to "4.8.3 Edit Lock B and C".)
(3) When the protection of the machining program is valid, the program cannot be transferred/verified. (Refer to "4.8.5 Data
Protection Keys".)
(4) When the device [Memory2] is selected, the name of batch output file is "ALL2.PRG".
Precautions
(1) When the machining program batch input/output function of NC memory is used, "()" cannot be used for the machining
program name. It is recognized that the inside of "( )" is a comment.
(2) The file name of file which consists of two or more machining program can have up to 32 characters, including the ex-
tension as well as the machining program.
(3) When the "Program batch" is designated to NC memory directory, it is not possible to delete, rename and merge files.
When the files are deleted in a batch, use "Program" for directory, and a wildcard (*) for file name.
(4) For other precautions, refer to "4.3 Transferring a File".
The file comparison starts. The verifying data is dis-
played. A message appears when the comparison is
completed. When the verification error occurs, the error
block is displayed in verification data display column and
the operation message "Compare error. Compare next
file?(Y/N)" appears.
119 IB-1501453-C