Mitsubishi Electric C80 Series Instruction Manual page 358

C80 Series Instruction Manual
9 Machining a Workpiece
Operation method (Registering the collation and stop)
(1)
Press the key to select the part system to be
stopped for collation.
(2) Press the main menu [Col stp].
(3) Select the device.
(4)
Press the [↑], [↓],
sor to the directory containing the file to be set.
If the list contents differ from the actual device or di-
rectory, press the menu [List update].
(5) Press the [INPUT] key.
(6) Input the program No., sequence No. and block No.
using / as a delimiter.
(Example) 1001/1/2 [INPUT]
When carrying out collation and stop of MDI pro-
gram, set "0" as the program No.
If pointing the cursor to a file name, the file name is
echoed back to the input area.
(7) Start the automatic operation.
Press the menu [Stop cancel] to cancel the collation and stop.
Note
(1) The maximum number of digits is eight for the sequence No. and five for the block No.
(2) Collation and stop can be canceled during automatic operation.
, or key to move the cur-
The currently selected part system is displayed at the
upper left of the screen.
The mode changes to the buffer correction mode.
The selected device name and root directory (memory:/
) are displayed in the device name and directory display
fields.
The menu [Memory] is highlighted.
Moves into the directory.
The collation and stop position is displayed, and the pro-
gram No. ("MDI" for MDI mode), sequence No., block
No. and "Verifying" appear.
When the collation and stop is completed, a message in-
dicating the end appears.
The stop position displayed on the screen is cleared,
and the "Verifying" display is erased.
333 IB-1501453-C