Mitsubishi Electric C80 Series Instruction Manual page 191

C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
Setting item
Setting Angle
IB-1501453-C
Details
Sets the tool installation angle.
Specifies the angle, assuming the direction perpendicular
to Z axis as 0 degrees with CW as positive (+).
+ Direction
X
Z
<Setting example>
Setting angle = 90 Setting angle =
180
When there is a tool rotary axis, set the angle assuming
that the angle of the axis is 0 degrees.
If the directions of the tool nose and shank are different
such as internal diameter machining tool, set the tool nose
angle for "Setting Angle".
<Example of grooving tool for front face machining>
Tool nose direction
(180°)
Shank direction (90°)
0 to 359.999 degrees
0 Degree
Setting angle =
270
Set 180° for "Set-
ting Angle".
166
Setting range