Comparing Files (Compare) - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
11 Performing a Backup Operation

11.3 Comparing Files (Compare)

Mainte
I/O
Operation method
(1) Press the menu [Area change] to select file setting
column A.
(2) Designate the device, directory and file name to be
compared.
(3) Press the menu [Area change] to select file setting
column B.
(4) Designate the other device, directory and file name
to be compared.
(5) Press the menu [Compare A:B].
Note
(1) Files that can be compared are text files only. Correct outcome will not be obtained through binary file comparison.
(2) "0" at the head of the file name will not be deleted when checking the individual file which consists of one program in
one file even the parameter "#8936 Delete leading 0" is set to "1". Designating the file name is required.
(3) When multiple successive files or wildcard (*) are/is designated as the transfer source, the comparison is executed ex-
cluding the programs which are subject to the edit lock according to the status of Edit lock B and C.
(4) If you attempt the file comparison during the tool data sorting, the operation message "Can't open file for dev A (or B)"
appears, which disables the comparison.
The file comparison starts.
The verifying data is displayed.
A message appears when the comparison is completed.
If a comparison error occurs, the block with the error is
displayed in the comparison data display column on the
screen.
405 IB-1501453-C