Origin Set, Origin Cancel - Mitsubishi Electric C80 Series Instruction Manual

Hide thumbs Also See for C80 Series:

Table of Contents

C80 Series Instruction Manual

8 Other Setups

8.3 Origin Set, Origin Cancel

Origin set and origin cancel can be executed.

Origin set and origin cancel cannot be executed for an axis of auxiliary axis state.

The origin is set.

When main menu [G92 set] is pressed, the menu [Origin set] is highlighted and the origin set mode is

The origin is canceled.

The origin cancel mode is activated when this menu is pressed.

This switches the axis to be displayed on the counter.

This menu is grayed out and non-selectable in the following cases:

- The number of enabled axes is 8 or less.

- The number of enabled axes is 9 or more, however, the number of displayed axes is 8 or less

according to the parameter "#1069 no_dsp Axis with no counter display" setting.

This closes the pop-up window and quits this function.

IB-1501453-C