Mitsubishi Electric C80 Series Instruction Manual page 2

This manual is a guide for using the MITSUBISHI CNC C80 Series.
This manual describes operations, production processes and maintenances for users who operate the MITSUBISHI CNC
installed machine tool. Read this manual thoroughly before using CNC unit. Moreover study the "Precautions for Safety" on
the next page before use to use the unit safely. Be sure to keep this manual always at hand.
CAUTION
For items described as "Restrictions" or "Usable State" in this manual, the instruction manual issued by the
machine tool builder (MTB) takes precedence over this manual.
Items not described in this manual must be interpreted as "not possible".
This manual is written on the assumption that all the applicable functions are included. Some of them, however,
may not be available for your NC system. Refer to the specifications issued by the machine tool builder before
use.
Refer to the Instruction Manual issued by each MTB for details on each machine tool.
Some screens and functions may differ depending on the NC system (or its version), and some functions may
not be possible. Please confirm the specifications before use.
Do not connect NC system to the Internet-connected network.
To maintain the safety of the NC system against unauthorized access from external devices via the network,
take appropriate measures.
In this manual, the following abbreviations might be used.
L system: Lathe system
M system: Machining center system
MTB: Machine tool builder
Also refer to the manuals on "Manual List" as necessary.
Introduction