Mitsubishi Electric C80 Series Instruction Manual page 3

Manuals related to M800/M80/E80/C80 Series are listed as follows.
These manuals are written on the assumption that all optional functions are added to the targeted model.
Some functions or screens may not be available depending on the machine or specifications set by MTB. (Confirm the
specifications before use.)
The manuals issued by MTB take precedence over these manuals.
Manual
M800/M80/E80 Series
Instruction Manual
C80 Series
Instruction Manual
M800/M80/E80/C80 Series
Programming Manual
(Lathe System) (1/2)
M800/M80/E80/C80 Series
Programming Manual
(Lathe System) (2/2)
M800/M80/E80/C80 Series
Programming Manual
(Machining Center System) (1/2)
M800/M80/E80/C80 Series
Programming Manual
(Machining Center System) (2/2)
M800/M80/E80/C80 Series
Alarm/Parameter Manual
Manual List
IB No.
 Operation guide for NC
IB-1501274
 Explanation for screen operation, etc.
 Operation guide for NC
IB-1501453
 Explanation for screen operation, etc.
 G code programming for lathe system
IB-1501275
 Basic functions, etc.
 G code programming for lathe system
IB-1501276
 Functions for multi-part system, high-accuracy function, etc.
 G code programming for machining center system
IB-1501277
 Basic functions, etc.
 G code programming for machining center system
IB-1501278
 Functions for multi-part system, high-accuracy function, etc.
 Alarms
IB-1501279
 Parameters
Purpose and Contents