Mitsubishi Electric C80 Series Instruction Manual page 27

C80 Series Instruction Manual
1 Outline of Menu Items
1Outline of Menu Items
This chapter explains the outline of the menus for each screen.
Refer to the corresponding section for detailed operation.
Monitor screen (Monitr)
Menus
This executes operation search.
Search
This executes restart search.
Reserch
This edits the searched machining program.
Edit
This displays the tool compensation amount.
A value can also be set for the tool compensation amount.
Offset
This displays the workpiece coordinate system offset.
A value can also be set for the workpiece coordinate system
Coord
offset.
This displays the workpiece coordinate system shift.
<Note>
W-shift
This menu is not displayed for M system, or when the pa-
rameter "#11056 Workshift invalid" is set to "1".
This displays the sub-menu to change the display type of the
monitor screen.
Dsp sw.
This displays the program modal.
Modal
This displays the program tree.
Tree
This displays the date, time and integrated time, etc.
The date, time and integrated time, etc., can also be set.
Time
This displays the common variables.
A value can also be set for the common variable.
Com var
This displays the local variables.
Loc var
This corrects the buffer.
P corr
This sets and cancels the origin.
G92 set
This executes collation and stop.
Col stp
IB-1501453-C
Details
2
Reference
9.1 Operation Search
9.3 Restart Search
9.5 Correcting the Machining Program
5.4 Setting Tool Compensation Amount
(Tool Offset Screen)
5.8 Setting Workpiece Coordinate Sys-
tem Offset
5.9 Setting Workpiece Coordinate Sys-
tem Shift
9.2.2 Switching the Display Format
9.2.7 Modal Display
9.2.8 Program Tree Display
8.1 Integrated Time
3.9.1 Common Variables
3.9.2 Local Variables
9.5.2 Buffer Correction
8.3 Origin Set, Origin Cancel
9.4 Collation and Stop