Displaying The Life Management Data (L System: Tool Life Management I) - Mitsubishi Electric E70 Series Instruction Manual

3.5.3 Displaying the Life Management Data (L system: Tool life management I)

The tool life management data can be set and displayed. Use the
registered tools cannot be displayed on one screen.
Display items (L system)
Display item
(1) #
Used
(2) Time
Life
Used
(3) Count
Life
A
(left side) 1: Current tool (tool being used)
(4) Status
B
(right side)
Menus (L system)
Menu
Line
Copies one line of tool life management data where the cursor is located.
copy
The copied tool life management data is written to the data in the line where the
cursor is located.
If the copied data is changed after the menu key [Line copy] is pressed, the data
Line
paste
before changing is written when pasted.
The copied data can be pasted as many times as is required until new data is
copied.
This erases a designated line (multiple lines possible) of tool life management
data.
The first and the last line No. of the data to be erased is specified with a "/"
Line
clear separating the Nos..
If the [INPUT] key is pressed without specifying a line, the data in the line where
the cursor is located is erased.
Details
Tool No.
The # No. is highlighted if the usage time reaches the life
time or if the usage count exceeds the life count.
The integrated time the tool is used.
This timer value is incremented during cutting.
Tool life time
Set the service lifetime.
The integrated count the tool is used.
The count goes up when a tool is selected.
Tool life count
Set the service life count.
The tool life management status is indicated.
0: Not used
2: Service lifetime (service life count) is exceeded.
(Used by machine tool builder)
Details
E70 Series Instruction Manual
3.5 Tool Life Management
/ keys to scroll between screens if all of the
Display range
0:0:0 to 99:59:59 (h:min:s)
0:0 to 99:59(h:min)
(0:0 = no warning given)
0 to 65000(times)
0 to 65000 (times)
(0:0 = no warning given)
0 to 2
0 to 99
Type
C
"Copying/pasting the
tool life data"
C
"Erasing one line of tool
life management data"
A
"Designating and
erasing a line"
Reference
I - 185