Tool Functions; Tool Functions (T8-Digit Bcd) - Mitsubishi Electric MELDAS C6 Programming Manual

11. Tool Functions

11. Tool Functions

11.1 Tool functions (T8-digit BCD)

Function and purpose
The tool functions are also known simply as T functions and they assign the tool numbers and tool
offset number. They are designated with a 8-digit number following the address T, and one set can
be commanded in commanded one block. The output signal is an 8-digit BCD signal and start
signal.
When the T functions are commanded in the same block as movement commands, there are 2
sequences in which the commands are executed, as below. The machine specifications determine
which sequence applies.
(1) The T function is executed after the movement command.
(2) The T function is executed simultaneously with the movement command.
Processing and completion sequences are required for all T commands.
11.1 Tool functions (T8-digit BCD)
97