Oil Change, Gearbox, Axis 4 - ABB IRB 7600 - 500/2.55 Product Manual

3.4.5 Oil change, gearbox, axis 4

Different types of oil
The primary and secondary gear may require different types of oil, that must never
be mixed!
If they are mixed, the gear must be rinsed according to section
contaminated gearbox on page
Location of gearbox
The axis 4 gearbox is located at the rear of the upper arm as shown in the figure
below.
xx0200000107
A
B
C
D
E
F
G
3HAC022033-001 Revision: M
Upper arm housing
Cover, axis 4 gearbox
Oil plug, filling, secondary gear
Oil plug, draining, secondary gear
Oil plug, filling, primary gearbox (draining not shown in figure, located further
down on the motor flange)
Label, specifies the type of oil in the secondary gear
Label, specifies the type of oil in the primary gear
© Copyright 2007-2013 ABB. All rights reserved.
3.4.5 Oil change, gearbox, axis 4
219.
3 Maintenance
Flushing a
Continues on next page
205