3 Maintenance
3.3.7 Inspection, balancing device
Continued
Inspection points, balancing device
The balancing device is located at the top rear of the frame as shown in the figure.
The figure also shows the inspection points, further described in the instructions.
xx0300000580
A
B
C
D
E
F
G
Continues on next page
170
Balancing device
Piston rod (inside)
Shaft, including securing screw
Ear, bearing and o-rings
Label with article number
Inspect the surroundings
Bearing, balancing device attachments
© Copyright 2007-2013 ABB. All rights reserved.
3HAC022033-001 Revision: M