ABB IRB 7600 - 500/2.55 Product Manual page 297

Irb 7600 series

Hide thumbs Also See for IRB 7600 - 500/2.55:

Table of Contents

3HAC022033-001 Revision: M

Before continuing any service work, please

observe the safety information in section

WARNING - The brake release buttons may be

jammed after service work on page

Refit the push button guard on the SMB cover.

If the battery has been disconnected the revolu-

tion counters must be updated.

Make sure all safety requirements are met

when performing the first test run. These are

further detailed in the section

test run may cause injury or damage! on

4.5.2 Replacement of brake release unit

Shown in the figure

release unit, frame on page

Detailed in section

counters on page

DANGER - First

Location of brake

Updating revolution