Method 2
Transportation according to method 2 is approved by ABB, if use of method 1
is not possible.
Always follow these instructions when transporting an ABB robot according to
method 2:
3HAC022033-001 Revision: M
•
Always place the robot in the ABB recommended transport position, described
in section
Risk of tipping/stability on page
•
Always read and follow the instructions in section
on page 65
•
Always read and follow the instructions in section
page 63
•
Always place the robot in the ABB recommended transport position for robot
with tool, described in sub section
on page
61.
•
Always use the recommended transport support described in sub section
Recommended transport support on page
© Copyright 2007-2013 ABB. All rights reserved.
2 Installation and commissioning
2.2 Robot transportation precautions
72.
Pre-installation procedure
Securing the robot on
Transport position with a transport support
62.
Continues on next page
Continued
59