Frame And Base; Replacing The Smb Unit - ABB IRB 7600 - 500/2.55 Product Manual

Irb 7600 series

Hide thumbs Also See for IRB 7600 - 500/2.55:

Table of Contents

4.5 Frame and base

Location of SMB unit

The SMB unit (SMB = serial measurement board) is located on the left hand side

of the frame as shown in the figure below.

xx0200000203

Required equipment

Equipment, etc.

Standard toolkit

3HAC022033-001 Revision: M

Battery cable

There are different variants of SMB units and batteries. The variant with the

3-pole battery contact has longer lifetime for the battery.

It is important that the SMB unit uses the correct battery. Make sure to order the

correct spare parts. Do not replace the battery contact!

For spare part number,

Spare part / part list

Content is defined in section

tools on page

4.5.1 Replacing the SMB unit

Continues on next page