Table of Contents
Advertisement
3 Maintenance
3.3.6 Inspection, oil level gearbox axis 6
3.3.6 Inspection, oil level gearbox axis 6
Location of gearbox
The axis 6 gearbox is located in the center of the wrist unit as shown in the figure
below. The alternative locations of the oil plugs for filling affects the measured oil
level. The different oil levels are specified in the procedure.
xx0200000114
A
B
C
D
Required equipment
Equipment
Lubricating oil
Standard toolkit
Continues on next page
166
Gearbox, axis 6
Oil plug, filling (notice the two possible locations B
Oil plug, draining (can be located on the turning disk instead)
Label, specifies the type of oil in gearbox axis 6
© Copyright 2007-2013 ABB. All rights reserved.
Art. no.
Note
See
Type and
amount of oil in
gearboxes on
page
194.
-
Content is defined in section
Standard tools on page
3HAC022033-001 Revision: M
or B
)
1
2
411.
Advertisement
Table of Contents
