Table of Contents
Advertisement
2
3
4
5
6
3HAC022033-001 Revision: M
Action
WARNING
Handling gearbox oil involves several safety risks.
Before proceeding, please read the safety inform-
ation in the section
WARNING - Safety risks during
work with gearbox lubricants (oil or grease) on
page
54.
Remove the oil plug for filling and the plug from
the vent hole.
Refill the gearbox with lubricating oil.
The amount of oil to be refilled depends on the
amount previously being drained. The correct oil
level is detailed in section
gearbox axis 2 on page
155.
WARNING
Do not mix oil types! If wrong oil is refilled, the
gearbox must be rinsed as detailed in Technical
reference manual - Lubrication in gearboxes.
Refit the oil plug.
© Copyright 2007-2013 ABB. All rights reserved.
3.4.3 Changing oil, axis-2 gearbox
Note
Shown in the figure
plugs on page
Where to find type of oil and total
amount is detailed in
amount of oil in gearboxes on
Inspection, oil level
page
Tightening torque: 24 Nm.
3 Maintenance
Continued
Location of oil
199.
Type and
194.
201
Advertisement
Table of Contents
