Table of Contents
Advertisement
Axis 1
The illustration below shows the position switch for axis 1. There is no extra cabling
installed on the robot, as for axes 2 and 3. Instead the switch is connected directly
to the connector in the base, R1.SW1.
xx0100000158
A
B
C
D
E
F
3HAC022033-001 Revision: M
Position switch, axis 1
Cam
Set screw, cam (cam stop)
Protection sheet
Rail
Rail attachment
© Copyright 2007-2013 ABB. All rights reserved.
2 Installation and commissioning
2.6.5 Installation of position switches (option)
Continues on next page
Continued
129
Advertisement
Table of Contents
