Mechanically Restricting The Working Range Of Axis 2 - ABB IRB 7600 - 500/2.55 Product Manual

2.6.3 Mechanically restricting the working range of axis 2

General
The working range of axis 2 is limited by fixed mechanical stops and can be reduced
by adding up to six additional mechanical stops with 15 graduation in respective
direction.
Mechanical stops, axis 2
The illustration shows the mounting position of the mechanical stops on axis 2.
xx0300000047
A
B
Required equipment
Equipment, etc.
Mechanical stop set, axis 2
Standard toolkit
3HAC022033-001 Revision: M
2.6.3 Mechanically restricting the working range of axis 2
Additional mechanical stops
Fixed mechanical stop
Art. no.
3HAC11077-1
-
© Copyright 2007-2013 ABB. All rights reserved.
2 Installation and commissioning
Note
Includes six stops, 3HAC11407-1, each
one restricting the working range by
15°.
Includes attachment screws.
Content is defined in section
tools on page 411.
Continues on next page
Standard
123