Replacing The Smb Battery - ABB IRB 7600 - 500/2.55 Product Manual

Irb 7600 series

Hide thumbs Also See for IRB 7600 - 500/2.55:

Table of Contents

3 Maintenance

3.4.8 Replacing the SMB battery

Continues on next page

The battery low alert (38213 Battery charge low) is displayed when the battery

needs to be replaced. The recommendation to avoid an unsynchronized robot

is to keep the power to the controller turned on until the battery is to be replaced.

For an SMB board with 3-pole battery contact (RMU101 3HAC044168-001 or

RMU102 3HAC043904-001), the lifetime of a new battery is typically 36 months.

For an SMB board with 2-pole battery contact, the typical lifetime of a new battery

is 36 months if the robot is powered off 2 days/week or 18 months if the robot is

powered off 16 h/day. The lifetime can be extended for longer production breaks

with a battery shutdown service routine. See Operating manual - IRC5 with

FlexPendant for instructions.

See instructions for batteries,

WARNING - Safety risks during handling of batteries

3HAC022033-001 Revision: M