Omron R88D-KN01L-ECT-L User Manual page 362

10 Operation
Linear Motor Setup Operation Procedure
Follow the steps below up to the end of this section to complete Linear Motor Setup.
If you are using the product in a default state, if you have interrupted the procedure before completion
by clicking the [Cancel] or [Stop] button, or if you have failed to step through to the end of the procedure
due to a computer failure etc., restart the following procedure from step 1.
1
Select [Use OMRON Model] in [Linear Motor Selection].
2
Select the model of the Linear Motor to connect.
10 - 16 G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications