Omron R88D-KN01L-ECT-L User Manual page 26

Regulations and Standards
Regulations and Standards
Overseas Use
To export (or provide to nonresident aliens) any part of this product that falls under the category of
goods (or technologies) for which an export certificate or license is mandatory according to the Foreign
Exchange and Foreign Trade Control Law of Japan, an export certificate or license (or service
transaction approval) according to this law is required.
Conformance to EC Directives
For the G5-series Servo Drive which is an EC-compliant product, it is the user's responsibility to check
and ensure the compliance of the equipment and the entire system with the applicable EC Directives.
EC Directive
Low Voltage Directive
EMC Directive
Machinery Directives
Note To conform to EMC Directives, the Servo Drive must be installed under the conditions described in 4-3
Wiring Conforming to EMC Directives on page 4-26.
24
Product
AC Servo Drives EN61800-5-1
Linear Motor EN60034-1
AC Servo Drives EN55011 classA group1
EN61000-6-2
EN61800-3
AC Servo Drives EN954-1 Cat.3
EN ISO13849-1 PL c, PL d
EN61508 (Part 1, 2, 4) SIL2
EN62061 SIL2
EN61800-5-2 (STO)
IEC61326-3-1
G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications
Applicable standards