Omron R88D-KN01L-ECT-L User Manual page 30

Items to Check after Unpacking
Servo Drive Accessories
Safety Precautions document × 1 copy
• Connectors, mounting screws, mounting brackets, and other accessories other than those in the
table below are not supplied. They must be prepared by the customer.
• The safety bypass connector is required if the safety function is not used. To use the safety function,
provide a separate safety I/O signal connector.
• If any item is missing or a problem is found such as Servo Drive damage, contact the OMRON dealer
or sales office where you purchased your product.
Specifications
Single-phase
100 VAC
Single-phase/
3-phase
200 VAC
3-phase
400 VAC
*1 Provide a safety connector separately to use the safety function.
Location of Iron-core Linear Motor Coil Unit Rating Label
28
Connector for main
circuit power supply
terminals and control
circuit power supply
terminals
100 W
200 W
400 W
200 W
400 W
750 W
1 kW
1.5 kW
600 W
1 kW
1.5 kW
2 kW
3 kW
Location of Rating Label
G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications
Connector for External
Regeneration Resistor
connection terminals
and motor connection
terminals
Included
Included
–
Safety
Mounting
bypass
brackets
connector
*1 –
Included
Included