1 Features and System Configuration
1-5
Unit Versions
The G5-series Servo Drive uses unit versions. Unit versions are used to manage differences in
supported functions when product upgrades are made.
1-5-1
Confirmation Method
The unit version of a G5-series Servo Drive is given on the product's nameplate as shown below.
Nameplate location
(R88D-KN01L-ECT-L)
1-5-2
Unit Versions
Unit version
Ver. 1.0
Ver. 1.1
1 - 12
Product Nameplate
Upgraded content
New release
Added the Linear Motor Setup function.
G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications
Unit Version
Here, the unit version is 1.1.
Supported CX-Drive versions
Ver. 2.70 or higher
Ver. 2.70 or higher